10V
-
font size
decrease font size
increase font size
| ITEM | UNIT | 10V |
|---|---|---|
| Controller System | Mitsubishi-M80A (M830 Optional) | |
| Travel | Linear Way (Z axis no banlance system) | |
| X Axis | (mm) | 1020 |
| Y Axis | (mm) | 700 (3 Linear Guideway) |
| Z Axis | (mm) | 600 |
| Spindle nose end to table | (mm) | 140-740 |
| Rapid travel X/Y/Z | (m/min) | 24 |
| Cutting Speed | (mm/min) | 1-15000 |
| Linear Way | ||
| X Axis | MRC45 (2 Roller Linear Guideway 6 Blocks) | |
| Y Axis | MRC45 (3 Roller Linear Guideway 5 Blocks) | |
| Z Axis | MRC45 (2 Roller Linear Guideway 6 Blocks) | |
| Screw | ||
| X Axis | R40*P10 (Screw-C2 Grinding Level) | |
| Y Axis | R40*P10 (Screw-C2 Grinding Level) | |
| Z Axis | R45*P10 (Screw-C2 Grinding Level) | |
| Worktable | ||
| T-slot(Width x pitch x No.) | (mm) | 18mm x 100mm x 6 |
| Table loading capacity | (kgs) | 1100 |
| Worktable size | (mm) | 1200 x 700 |
| Spindle | ||
| Spindle taper | HSK-A63 | |
| BT40 (optional) | ||
| Spindle speed | (rpm) | Direct-drive / 12000 |
| ( 15000rpm / 7.5/11kW) | ||
| Motor | ||
| Spindle motor | (kW) | 7.5/11 |
| (15000rpm 7.5/11kW optional) | ||
| X servo motor | (kW) | 3.5 |
| Y servo motor | (kW) | 3.5 |
| Z servo motor | (kW) | 4.5 (with brake) |
| Motor | ||
| Spindle motor | (kW) | 7.5/11 |
| (15000rpm 7.5/11kW optional) | ||
| X servo motor | (kW) | 3.5 |
| Y servo motor | (kW) | 3.5 |
| Z servo motor | (kW) | 4.5 (with brake) |
| Motor | ||
| Spindle motor | (kW) | 7.5/11 |
| (15000rpm 7.5/11kW optional) | ||
| X servo motor | (kW) | 3.5 |
| Y servo motor | (kW) | 3.5 |
| Z servo motor | (kW) | 4.5 (with brake) |
| Machine size | ||
| Machine height | (mm) | 2360 |
| Machine size | (mm) | 3000 (W) x 2300 (D) |
| Machine weight | (kgs) | 7200 |
| Machine height | (mm) | 3000 |
| Machine size | (mm) | 3800 (W) x 2800 (D) (with Screw type chip conreyor) |
| Machine size | (mm) | 3850 (W) x 2800 (D) (with Band type chip conveyor) |
| Accuracy | ||
| Positioning accuracy | (mm) | ± 0.005 |
| Repeatability | (mm) | ± 0.003 |
*All specification and design are subject to change without notice.
| STANDARD : |
|---|
| Fully Enclosed Splash Guard |
| Heat Exchanger for power cabinet |
| Cutting Coolant System and Air Blast |
| Spindle coolant System |
| Auto Lubrication System |
| Work Lamp (36W) * 2 |
| LED Spot Light |
| LED 3-color Indicator Light |
| Screw Type Chip Auger |
| Auto Power Off |
| Tool Kit |
| Coolant Gun / Air Gun |
| Lineary Way-Swiss SCHNEEBERGER |
| Coulping-Germany Kupplungstechnik Gmbh |
| Screw-C2 Grinding Level |
| Bearing-Japen NSK |
Published in
CNC MILLING MACHINE